എല്ലാ വിഭാഗത്തിലും

വെനീർ സ്ലൈസർ

വീട്> ഉല്പന്നങ്ങൾ > വെനീർ സ്ലൈസർ

ഉല്പന്നങ്ങൾ

വെനീർ
തിരശ്ചീനമായ വെനീർ സ്ലൈസർ വുഡ് ലംബമായ വെനീർ സ്ലൈസർ വെനീർ സ്ലൈസർ മെഷീൻ പ്ലൈവുഡ് പ്രൊഡക്ഷൻ ലൈൻ

തിരശ്ചീനമായ വെനീർ സ്ലൈസർ വുഡ് ലംബമായ വെനീർ സ്ലൈസർ വെനീർ സ്ലൈസർ മെഷീൻ പ്ലൈവുഡ് പ്രൊഡക്ഷൻ ലൈൻ


Veneer slicer is mainly for slicing solid wood, engineer wood and other composite board, working efficiency is high, and veneer thickness is uniform. It is widely adopt in decorative veneer of plywood, furniture, flooring, construction industry and so on.

വിവരണം

Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine plywood production line

Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine പ്ലൈവുഡ് പ്രൊഡക്ഷൻ ലൈൻ,horizontal wood slicing 4*8 engineer wood block veneer slicer machine


1 Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.

2 Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber.

1

3 Whole casted beam holds the log strongly, and hydraulic driven hooks clamp the log tightly and effectively. Vacuum disc system is used inside the log beam to help holding the big timber in order to avoid logs deforming or dropping down during cutting procedure

2

4 All switch button are gathered in a cabinet.Single person can operate the machine avoiding the dangerous caused by fault.

3

5 Special designed big size driving gear runs smoothly with a low noise when it runs high speed.
wood slicing vertical veneer slicer machine,veneer slicer machine plywood production line,veneer slicer machine,engineering wood block veneer gurjan veneer slicer,wood veneer slicer machine,woodworking machines veneer slicer.

 SPECIFICATIONS FOR HORIZONTAL VENEER SLICER
മാതൃകബ്ബ്ക്സനുമ്ക്സബ്ബ്ക്സനുമ്ക്സബ്ബ്ക്സനുമ്ക്സ
Max cutting size2600x700x680mm2600x1300x950mm 4200x1300x950 മിമി
ബ്ലേഡ് വലുപ്പം3500x200x24mm3500x200x24mm 4500x2000x24 മിമി
വെനീർ കനം0.1-2.2mm0.1-2.2mm 0.1-2.2mm
മുറിക്കുന്ന വേഗത0-36pcs / മിനിറ്റ്0-36pcs / മിനിറ്റ് 0-36pcs / മിനിറ്റ്
Wood clamping unit10 യൂണിറ്റുകൾക്സനുമ്ക്സ യൂണിറ്റുകൾ 10 യൂണിറ്റുകൾ
Clamping methodsഹൈഡ്രോളിക്ഹൈഡ്രോളിക് ഹൈഡ്രോളിക്
ആകെ ഭാരം22TON24TON 32TON
മൊത്തത്തിലുള്ള വലുപ്പം8030x4530x2530mm9530x5670x2470mm 9550x5950x2990 മിമി

Photos in User Factory

4

5

മെഷീൻ ഭാഗങ്ങൾ
Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.

6

Double V-chutes

7

കൺവെയർ ബെൽറ്റ്

8

servo മോട്ടോർ

9

പ്രധാന സവിശേഷതകൾ
Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber

10

11

12

13

14

15

16

അന്വേഷണം

ടാഗുകൾ:

ബന്ധപ്പെട്ട ഉൽപ്പന്ന

ഹോട്ട് വിഭാഗങ്ങൾ

ഓൺലൈനിൽ